LanCapi senden besetzt, empfangen funktioniert

Fragen zu LANCOM LANCAPI und CAPI Fax Modem.

Moderator: Lancom-Systems Moderatoren

Antworten
TomNF
Beiträge: 4
Registriert: 13 Jan 2014, 14:54

LanCapi senden besetzt, empfangen funktioniert

Beitrag von TomNF »

Hallo,

ich bin Lancom und Forums-Neuling.
Wir haben am WE unsere Technik umgestrickt, unter anderem einen 2003 SBS virtualisiert. Vorher hatten wir eine Fritz!Card in dem Server. Jetzt wurde uns von dem Hardwarelieferanten ein Lancom 1781A mit FaxGateway hingestellt. Ich kann über das FaxGateway über eine MSN Faxe empfangen (die ISDN-Karte konnte vorher 4) doch beim Versand wird immer angerzeigt: Leitung besetzt. Der Lancom hängt hinter einer Auerswald Commander Business. Ich habe hier auch schon mit direktem Amtsapparat probiert ohne Erfolg.
Hat jemand eine Idee.

Gruß Tom
Benutzeravatar
MoinMoin
Moderator
Moderator
Beiträge: 1985
Registriert: 12 Nov 2004, 16:04

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von MoinMoin »

Moin, moin!

Mach bitte einen CAPI-Trace auf dem Client und gleichzeitig einen D-Kanal-Trace auf dem LANCOM.

Ciao, Georg
TomNF
Beiträge: 4
Registriert: 13 Jan 2014, 14:54

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von TomNF »

Hoffe ich habe den Trace richtig erstellt.
[TraceData]

(Version) 8.30.0001
(Tracesessions) 0
(Comment) {N/A}
(NumberOfMessages) 28
(OffsetToIndex) 23758
[EndOfHeader]
















































[TraceStarted] 2014/01/13 15:49:17,732
Used config:
# Trace config
trace + D-channel-dump
trace + Status
trace + Error

# Show commands
show bootlog
[ShowCmd] 2014/01/13 15:49:18,482
Result of command: "show bootlog "
Boot log (977 Bytes):

****

07/22/2011 08:47:01 System boot after power on

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

****

07/15/2011 14:02:01 System boot after system reset request

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

****

01/01/1900 00:00:01 System boot after power on

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

****

01/01/1900 00:00:01 System boot after power on

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

****

01/01/1900 00:00:01 System boot after manual boot request

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

****

01/01/1900 00:00:01 System boot after power on

DEVICE: LANCOM 1781A
HW-RELEASE: B
VERSION: 8.82.0100RU1 / 28.08.2013

[Sysinfo] 2014/01/13 15:49:18,560
Result of command: "sysinfo"

DEVICE: LANCOM 1781A
HW-RELEASE: B
SERIAL-NUMBER: 4003010418100141
MAC-ADDRESS: 00a0571ef82e
IP-ADDRESS: 192.168.7.168
IP-NETMASK: 255.255.255.0
INTRANET-ADDRESS: 0.0.0.0
INTRANETMASK: 0.0.0.0
LANCAPI-PORT: 75
VERSION: 8.82.0100RU1 / 28.08.2013
NAME: Fax-Gateway
CONFIG-STATUS: 1056;0;aa7b3752dcd2e6844f2d058161ba8ec26a7d5c09.00000000000000.28
FIRMWARE-STATUS: 1;1.2;1.1;*;8.82.0100RU1.28082013.2
HW-MASK: 00000000000000000000000001110011
FEATUREWORD: 00000000001000000000000101011100
REGISTERED-WORD: 00000000001000000000000101011100
FEATURE-LIST: 02/F
FEATURE-LIST: 03/F
FEATURE-LIST: 04/F
FEATURE-LIST: 06/F
FEATURE-LIST: 08/F
FEATURE-LIST: 15/F
TIME: 00000000000000
HTTP-PORT: 80
HTTPS-PORT: 443
TELNET-PORT: 23
TELNET-SSL-PORT: 992
SSH-PORT: 22
Production-Date: 2013-11-06
MOD-Level: B1
LOCATION:
COUNTRY-CODE: 0/0 (NA)
COMMENT:
MYVPN: 0
MYVPN-HOSTNAME:
EXTENDED-NAME: LANCOM 1781A

[D-channel-dump] 2014/01/13 15:49:28,188 Devicetime: 1900/01/02 22:18:19,730
TE-1 TX 22:18:18,730 Frame number : 16
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:28,188 Devicetime: 1900/01/02 22:18:19,736
ECHO-1 RX 22:18:18,730 Frame number : 17
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:28,250 Devicetime: 1900/01/02 22:18:19,849
TE-1 RX 22:18:18,840 Frame number : 18
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:28,250 Devicetime: 1900/01/02 22:18:19,850
TE-1 TX 22:18:18,850 Frame number : 19
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:28,250 Devicetime: 1900/01/02 22:18:19,852
TE-1 RX 22:18:18,850 Frame number : 20
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:28,250 Devicetime: 1900/01/02 22:18:19,856
ECHO-1 RX 22:18:18,850 Frame number : 21
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________


[D-channel-dump] 2014/01/13 15:49:33,189 Devicetime: 1900/01/02 22:18:24,730
TE-1 TX 22:18:23,730 Frame number : 22
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0101 0011 Type : DISC
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:33,189 Devicetime: 1900/01/02 22:18:24,735
ECHO-1 RX 22:18:23,730 Frame number : 23
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0101 0011 Type : DISC
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:33,251 Devicetime: 1900/01/02 22:18:24,799
TE-1 RX 22:18:23,790 Frame number : 24
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0111 0011 Type : UA
________________________________________________________________________________


[D-channel-dump] 2014/01/13 15:49:45,489 Devicetime: 1900/01/02 22:18:37,031
TE-1 TX 22:18:36,030 Frame number : 25
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0111 1111 Type : SABME
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,489 Devicetime: 1900/01/02 22:18:37,037
ECHO-1 RX 22:18:36,030 Frame number : 26
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0111 1111 Type : SABME
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,504 Devicetime: 1900/01/02 22:18:37,117
TE-1 RX 22:18:36,110 Frame number : 27
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0111 0011 Type : UA
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,504 Devicetime: 1900/01/02 22:18:37,119
TE-1 TX 22:18:36,110 Frame number : 28
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 000- N(S) : 0
---- ---0 Type : I-Frame
4 0000 000- N(R) : 0
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0100 Call reference value : 100
8 0000 0101 Message Type : SETUP
9 0000 0100 I-Element : Bearer capability
10 0000 0011 length : 3
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---1 0000 transfer capability : 3.1 kHz audio
12 1--- ---- Extension bit : bit set
-00- ---- transfer mode : circuit mode
---1 0000 transfer speed : 64 kbit/s
13 1--- ---- Extension bit : bit set
-01- ---- L1 indentifier : 0x01
---0 0011 user inf. L1 prot. : G.711 A-Law

14 0001 1000 I-Element : Channel identification
15 0000 0001 length : 1
16 1--- ---- Extension bit : bit set
-0-- ---- interface ID present : ID not present (implicitly identified)
--0- ---- interface type : basic interface
---0 ---- spare bit(s) : bit not set
---- 0--- preferred/exclusive : preferred
---- -0-- D-Channel indicator : channel is not D-Channel
---- --11 channel selection : any channel

17 0111 0000 I-Element : Called party number
18 0000 1000 length : 8
19 1--- ---- Extension bit : bit set
-000 ---- type of number : unknown
---- 0000 numbering plan : unknown

Information content
Byte 20 ... 26
5980879

________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,520 Devicetime: 1900/01/02 22:18:37,137
ECHO-1 RX 22:18:36,130 Frame number : 29
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 000- N(S) : 0
---- ---0 Type : I-Frame
4 0000 000- N(R) : 0
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0100 Call reference value : 100
8 0000 0101 Message Type : SETUP
9 0000 0100 I-Element : Bearer capability
10 0000 0011 length : 3
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---1 0000 transfer capability : 3.1 kHz audio
12 1--- ---- Extension bit : bit set
-00- ---- transfer mode : circuit mode
---1 0000 transfer speed : 64 kbit/s
13 1--- ---- Extension bit : bit set
-01- ---- L1 indentifier : 0x01
---0 0011 user inf. L1 prot. : G.711 A-Law

14 0001 1000 I-Element : Channel identification
15 0000 0001 length : 1
16 1--- ---- Extension bit : bit set
-0-- ---- interface ID present : ID not present (implicitly identified)
--0- ---- interface type : basic interface
---0 ---- spare bit(s) : bit not set
---- 0--- preferred/exclusive : preferred
---- -0-- D-Channel indicator : channel is not D-Channel
---- --11 channel selection : any channel

17 0111 0000 I-Element : Called party number
18 0000 1000 length : 8
19 1--- ---- Extension bit : bit set
-000 ---- type of number : unknown
---- 0000 numbering plan : unknown

Information content
Byte 20 ... 26
5980879

________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,676 Devicetime: 1900/01/02 22:18:37,228
TE-1 RX 22:18:36,220 Frame number : 30
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---0 P/F : bit not set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,739 Devicetime: 1900/01/02 22:18:37,344
TE-1 RX 22:18:36,340 Frame number : 31
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 000- N(S) : 0
---- ---0 Type : I-Frame
4 0000 001- N(R) : 1
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 1--- ---- CR-Flag : Destination
-110 0100 Call reference value : 100
8 0101 1010 Message Type : RELEASE COMPLETE
9 0000 1000 I-Element : Cause
10 0000 0010 length : 2
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0001 location : priv. netw. serv. local user
12 1--- ---- Extension bit : bit set
-001 1100 cause : invalid number format

________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,801 Devicetime: 1900/01/02 22:18:37,360
TE-1 TX 22:18:36,360 Frame number : 32
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---0 P/F : bit not set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:45,801 Devicetime: 1900/01/02 22:18:37,366
ECHO-1 RX 22:18:36,360 Frame number : 33
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---0 P/F : bit not set
________________________________________________________________________________


[D-channel-dump] 2014/01/13 15:49:55,802 Devicetime: 1900/01/02 22:18:47,340
TE-1 TX 22:18:46,340 Frame number : 34
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:55,802 Devicetime: 1900/01/02 22:18:47,346
ECHO-1 RX 22:18:46,340 Frame number : 35
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:55,848 Devicetime: 1900/01/02 22:18:47,458
TE-1 RX 22:18:46,450 Frame number : 36
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:55,848 Devicetime: 1900/01/02 22:18:47,459
TE-1 TX 22:18:46,450 Frame number : 37
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:55,848 Devicetime: 1900/01/02 22:18:47,461
TE-1 RX 22:18:46,460 Frame number : 38
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[D-channel-dump] 2014/01/13 15:49:55,848 Devicetime: 1900/01/02 22:18:47,465
ECHO-1 RX 22:18:46,460 Frame number : 39
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1011 001- TEI : 89
---- ---1 EA : bit set
3 0000 0001 Type : RR
4 0000 001- N(R) : 1
---- ---1 P/F : bit set
________________________________________________________________________________

[TraceStopped] 2014/01/13 15:49:58,021
Used config:
# Trace config
trace + D-channel-dump
trace + Status
trace + Error

# Show commands
show bootlog
[Legend] 2009/07/09 00:00:00,000
D-channel-dump, TraceStarted, TraceStopped, Sysinfo, ShowCmd
[Index] 2009/07/09 00:00:00,000
1,159,9;4,1073,52;3,1187,40;0,565,12;0,567,12;0,561,12;0,561,12;0,565,12;0,564,13;0,479,10;0,481,10;0,478,11;0,480,10;0,482,10;0,477,10;0,2220,51;0,2222,51;
0,569,12;0,1298,28;0,565,12;0,568,13;0,565,12;0,567,12;0,561,12;0,561,12;0,565,12;0,563,12;2,159,9;
garfield0815

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von garfield0815 »

trag doch mahl die ip des lancoms in den lancapi ein
backslash
Moderator
Moderator
Beiträge: 7019
Registriert: 08 Nov 2004, 21:26
Wohnort: Aachen

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von backslash »

Hi TomNF

da kommt von der Vermittlungstelle folgendes:

Code: Alles auswählen

9 0000 1000 I-Element : Cause
10 0000 0010 length : 2
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0001 location : priv. netw. serv. local user
12 1--- ---- Extension bit : bit set
-001 1100 cause : invalid number format
kann es sein, daß du hinter einer TK-Anlage sitzt und du deshalb eine 0 vorwählen mußt?

Gruß
Backslash
TomNF
Beiträge: 4
Registriert: 13 Jan 2014, 14:54

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von TomNF »

Hallo garfield0815,

wo mache ich das?



Hallo backslash,

ja ich sitze hinter einer Auerswald Business, habe aber bereits das direkte Amt eingestellt. Vorher habe ich es mit einer zusätzlichen 0 probiert, auch ohne Erfolg.

Gruß Tom
garfield0815

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von garfield0815 »

im lancapi modul neben der uhr unter geräte glaub ich
TomNF
Beiträge: 4
Registriert: 13 Jan 2014, 14:54

Re: LanCapi senden besetzt, empfangen funktioniert

Beitrag von TomNF »

Hatte kurz mal den Effekt, dass ein Fax 6 Minuten im Ausgang hing und dann gar nichts mehr mit Fax ging. Musste den Server schnell mal neustarten.

Gruß Tom
Antworten