ISDN Keypad Steuer-Sequenzen

[KK]

Hallo Forum,

ein 1823 soll per ISDN eine Keypad-Sequenz an eine übergeordnete ISDN-TK Anlage senden. Alle Verbindungen zwischen TK und Lancom laufen perfekt, nur Steuer-Sequenzen werden von der TK-Anlage (Auerswald 5020) offenbar als Ruf-Nr mißverstanden.

Beispiel: Sequenz ##8*4019988# meldet einen Teilnehmer in einer gewissen Arbeitsgruppe der TK-Anlage an. Auf allen analogen Geräten an der TK-Anlage funzt diese Sequenz. Um die Sache zu vereinfachen, habe ich im Call-Router folgenden Eintrag erstellt:

Gerufene Nr: 991
Ziel-Nr. ##8*4019988#
Ziel-Leitung: ISDN

So sollen sich Teilehmer der untergeordneten 1823 per Kurzwahl 991 in der Arbeitsgruppe auf der Auerswald anmelden können.

Effekt ist jedoch eine Sprachverbindung, die sofort mit 'Busy' endet. Unten der Trace vom Call-Manager.

Was mache ich falsch? Müssen Keypad-Sequenzen nicht über den D-Kanal gesendet werden? Wenn ja, wie geht das?

---

[Callmanager] 2009/03/20 18:59:30,450 [Sip-UA] : -----[ INVITE INDICATION, call-id=808C5497-E613-DE11-BE1B-000777640932@192.168.1.12
[Callmanager] 2009/03/20 18:59:30,450 [Sip-UA] : - info : generate new call, call-id=2229
[Callmanager] 2009/03/20 18:59:30,450 [Sip-UA] : - info : reject, login needed
[Callmanager] 2009/03/20 18:59:30,460 [SIP-CALL] : -----[ ACK INDICATION
[Callmanager] 2009/03/20 18:59:30,460 [SIP-CALL] : - info : call-id=2229
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : -----[ INVITE INDICATION, call-id=808C5497-E613-DE11-BE1B-000777640932@192.168.1.12
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : - info : -----[ use existing call, call-id=2229
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : - info : generate trying response
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : - info : invite accepted
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : - info : early media detected
[Callmanager] 2009/03/20 18:59:30,470 [Sip-UA] : - info : ResponseInfo: 'Trying'
[Callmanager] 2009/03/20 18:59:30,470 [SIP-CALL] : -----[ open Media Proxy On Invite , call-id=2229
[Callmanager] 2009/03/20 18:59:30,470 [VCM] : -----[ CALL INDICATION, call-id=2229
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : Src CallId=808C5497-E613-DE11-BE1B-000777640932@192.168.1.12
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : From: 11@192.168.003.001
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : To : 9992@192.168.003.001
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : number is complete
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : parse call routing table for active entries
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : using routing entry in row # 3
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : first/single way destination ##8*4019988@isdn via ISDN
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : proceeding call
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : -----[ INITIATE CALLS, call-id=2229
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : initiate call to ##8*4019988@isdn
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : outgoing line is ISDN
[Callmanager] 2009/03/20 18:59:30,480 [VCM] : - info : called number is complete
[Callmanager] 2009/03/20 18:59:30,490 [VCM] : -----[ INITIATE CALL, call-id=2229
[Callmanager] 2009/03/20 18:59:30,490 [ISDN-LINE] : -----[ INITIATE CALL, call-id=2229
[Callmanager] 2009/03/20 18:59:30,500 [VCM] : -----[ INFO IS COMPLETE, call-id=2229
[Callmanager] 2009/03/20 18:59:30,500 [VCM] : - info : called address is complete
[Callmanager] 2009/03/20 18:59:30,500 [VCM] : - info : Line: 'ISDN'
[Callmanager] 2009/03/20 18:59:30,500 [VCM] : - info : From: '11@192.168.003.001'
[Callmanager] 2009/03/20 18:59:30,500 [VCM] : - info : To : '##8*4019988@isdn'
[Callmanager] 2009/03/20 18:59:30,500 [ISDN-LINE] : - info : convert Cln-id '11' to Cln MSN '31'
[Callmanager] 2009/03/20 18:59:30,500 [ISDN-LINE] : -----[ BUILD CONNECT REQUEST, call-id=2229
[Callmanager] 2009/03/20 18:59:30,500 [ISDN-LINE] : - info : audio mode
[Callmanager] 2009/03/20 18:59:30,500 [Sip-UA] : - info : reply code: 1
[Callmanager] 2009/03/20 18:59:30,500 [Sip-UA] : - info : sip user is busy
[Callmanager] 2009/03/20 18:59:30,580 [VCM] : -----[ CALL PROCEEDING INDICATION, call-id=2229
[Callmanager] 2009/03/20 18:59:30,580 [VCM] : - info : Src CallId=808C5497-E613-DE11-BE1B-000777640932@192.168.1.12
[Callmanager] 2009/03/20 18:59:30,580 [ISDN-LINE] : -----[ PROGRESS, plci=0X34B
[Callmanager] 2009/03/20 18:59:30,580 [ISDN-LINE] : - info : call-id=2229
[Callmanager] 2009/03/20 18:59:30,580 [ISDN-LINE] : - info : inband tones available
[Callmanager] 2009/03/20 18:59:30,600 [VCM] : -----[ PROGRESS INDICATION, call-id=2229
[Callmanager] 2009/03/20 18:59:30,600 [SIP-CALLMANAGER] : -----[ Progress, call-id=2229
[Callmanager] 2009/03/20 18:59:30,600 [VCM] : -----[ connect media, call-id=2229
[Callmanager] 2009/03/20 18:59:32,880 [ISDN-LINE] : -----[ CANCEL INDICATION, call-id=2229
[Callmanager] 2009/03/20 18:59:32,880 [VCM] : -----[ DISCONNECT INDICATION, call-id=2229
[Callmanager] 2009/03/20 18:59:32,880 [VCM] : - info : cause is 'normal call clearing'
[Callmanager] 2009/03/20 18:59:32,880 [VCM] : - info : disconnect media
[Callmanager] 2009/03/20 18:59:32,890 [VCM] : - info : disconnect indication from destination
[Callmanager] 2009/03/20 18:59:32,900 [VCM] : - info : ckeck backup, code: 16
[Callmanager] 2009/03/20 18:59:32,900 [VCM] : - info : no alternative (backup) available
[Callmanager] 2009/03/20 18:59:32,900 [SIP-CALLMANAGER] : -----[ DISCONNECT REQUEST
[Callmanager] 2009/03/20 18:59:32,900 [SIP-CALLMANAGER] : - info : cause is 'normal call clearing'
[Callmanager] 2009/03/20 18:59:32,910 [Sip-UA] : -----[ 200 OK INDICATION
[Callmanager] 2009/03/20 18:59:32,910 [Sip-UA] : - info : call-id=2229
[Callmanager] 2009/03/20 18:59:32,910 [VCM] : -----[ DISCONNECT RESPONSE, call-id=2229
[Callmanager] 2009/03/20 18:59:32,910 [VCM] : - info : cause is 'normal call clearing'
[Callmanager] 2009/03/20 18:59:32,910 [ISDN-LINE] : -----[ DISCONNECT CONFIRM, call-id=2229
[Callmanager] 2009/03/20 18:59:32,910 [ISDN-LINE] : - info : plci=0X34B
[Callmanager] 2009/03/20 18:59:32,990 [ISDN-LINE] : -----[ DISCONNECT RESPONSE, plci=0X34B
[Callmanager] 2009/03/20 18:59:32,990 [VCM] : -----[ DISCONNECT RESPONSE, call-id=2229
[Callmanager] 2009/03/20 18:59:32,990 [VCM] : - info : cause is 'normal call clearing'
[Callmanager] 2009/03/20 18:59:32,990 [VCM] : - info : reject, destination information not available[TraceStopped] 2009/03/20 19:02:33,000

[REPTILE]

mhh warum meldest du das entsprechende SIP gerät nicht direkt an der compakt an? gibt ja mittlerweile interne VoIP unterstützung....

[KK]

mhh warum meldest du das entsprechende SIP gerät nicht direkt an der compakt an?

Täte ich ja gerne - Aber als SIP-Teilnehmer kann ich mich nicht an der Auerswald anmelden. Die Anlage unterstützt nur Verbindungen zu SIP-Providern. Das kann natürlich auch das Lancom sein. Aber intern läuft nur ISDN / Analog.

gibt ja mittlerweile interne VoIP unterstützung....

Wo denn? Was habe ich nicht gepeilt???

[REPTILE]

Nein da muss ich dir wiedersprechen, wir sind zertifizierter Auerswald fachhändler daher weis ich das das geht, mache doch mal ein firmware update auf die neuste version, dann gehen auch interne SIP Teilnehmer

[KK]

Nein da muss ich dir wiedersprechen, wir sind zertifizierter Auerswald fachhändler daher weis ich das das geht, mache doch mal ein firmware update auf die neuste version, dann gehen auch interne SIP Teilnehmer

Hilft in diesem Fall leider nicht weiter. In der Zentrale läuft der LAN-Monitor mit Überblick auf den Status der Ausser-Haus-Arbeitsplätze...

Schade - gibt's denn zu meiner eigentlichen Frage hier keinerlei Hinweis? Es sollte doch möglich sein, vom Lancom eine Steuersequenz per ISDN an eine TK-Anlage, bzw. einen Provider zu senden?!?

[anton]

Hi KK,

zusätzlich zu dem Call-Trace wäre ein D-Channeltrace hilfreich, um die Kommunikation auf dem S0-Bus im D-Channel zu sehen.

Benutze bitte folgende Syntax:

tr # call ; tr # d-c @ cr

LG
Anton

[KK]

Hi KK,

zusätzlich zu dem Call-Trace wäre ein D-Channeltrace hilfreich, um die Kommunikation auf dem S0-Bus im D-Channel zu sehen.

Benutze bitte folgende Syntax:

tr # call ; tr # d-c @ cr

LG
Anton

Hi Anton,

hier der D-Kanal Trace:

#
| LANCOM 1823 VoIP (Annex B)
| Ver. 7.58.0045 / 14.11.2008 / 6.26b/E74.02.54
| SN. 067081800120
| Copyright (c) LANCOM Systems
Hatzfeld, Connection No.: 002 (WLAN)
Password:
root@Hatzfeld:/
> tr # call ; tr # d-c @ cr
Callmanager ON
D-channel-dump ON @ cr
root@Hatzfeld:/
>
[Callmanager] 2009/03/25 12:52:35,220 [Sip-UA] : -----[ INVITE INDICATION, call-
id=1791156182@192_168_1_32
[Callmanager] 2009/03/25 12:52:35,220 [Sip-UA] : - info : generate new cal
l, call-id=17195
[Callmanager] 2009/03/25 12:52:35,220 [Sip-UA] : - info : reject, login ne
eded
[Callmanager] 2009/03/25 12:52:35,310 [SIP-CALL] : -----[ ACK INDICATION
[Callmanager] 2009/03/25 12:52:35,310 [SIP-CALL] : - info : call-id=17195
[Callmanager] 2009/03/25 12:52:35,320 [Sip-UA] : -----[ INVITE INDICATION, call-
id=1791156182@192_168_1_32
[Callmanager] 2009/03/25 12:52:35,320 [Sip-UA] : - info : -----[ use exist
ing call, call-id=17195
[Callmanager] 2009/03/25 12:52:35,320 [Sip-UA] : - info : generate trying
response
[Callmanager] 2009/03/25 12:52:35,330 [Sip-UA] : - info : invite accepted
[Callmanager] 2009/03/25 12:52:35,330 [Sip-UA] : - info : early media dete
cted
[Callmanager] 2009/03/25 12:52:35,330 [Sip-UA] : - info : ResponseInfo: 'T
rying'
[Callmanager] 2009/03/25 12:52:35,330 [SIP-CALL] : -----[ open Media Proxy On In
vite , call-id=17195
[Callmanager] 2009/03/25 12:52:35,330 [VCM] : -----[ CALL INDICATION, call-id=17
195
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : Src CallId=1791156182@192_168_1_32
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : From: 12@voip1.de
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : To : 991@voip1.de
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : number is complete
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : parse call routing
table for active entries
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : using routing entry
in row # 3
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : first/single way de
stination ##8*4019988@isdn via ISDN
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : proceeding call
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : -----[ INITIATE CALLS, call-id=171
95
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : initiate call to ##
8*4019988@isdn
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : outgoing line is IS
DN
[Callmanager] 2009/03/25 12:52:35,340 [VCM] : - info : called number is co
mplete
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : -----[ INITIATE CALL, call-id=1719
5
[Callmanager] 2009/03/25 12:52:35,350 [ISDN-LINE] : -----[ INITIATE CALL, call-i
d=17195
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : -----[ INFO IS COMPLETE, call-id=1
7195
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : - info : called address is c
omplete
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : - info : Line: 'ISDN'
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : - info : From: '12@voip1.de'
[Callmanager] 2009/03/25 12:52:35,350 [VCM] : - info : To : '##8*4019988@
isdn'
[Callmanager] 2009/03/25 12:52:35,350 [ISDN-LINE] : - info : convert Cln-i
d '12' to Cln MSN '31'
[Callmanager] 2009/03/25 12:52:35,350 [ISDN-LINE] : -----[ BUILD CONNECT REQUEST
, call-id=17195
[Callmanager] 2009/03/25 12:52:35,350 [ISDN-LINE] : - info : audio mode
[Callmanager] 2009/03/25 12:52:35,350 [Sip-UA] : - info : reply code: 1
[Callmanager] 2009/03/25 12:52:35,350 [Sip-UA] : - info : sip user is busy
[D-channel-dump] 2009/03/25 12:52:35,360
TE-1 TX 20:19:27,360 Frame number : 203
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 010- N(S) : 26
---- ---0 Type : I-Frame
4 0000 010- N(R) : 2
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0000 0101 Message Type : SETUP
9 0000 0100 I-Element : Bearer capability
10 0000 0011 length : 3
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 0000 transfer capability : speech
12 1--- ---- Extension bit : bit set
-00- ---- transfer mode : circuit mode
---1 0000 transfer speed : 64 kbit/s
13 1--- ---- Extension bit : bit set
-01- ---- L1 indentifier : 0x01
---0 0011 user inf. L1 prot. : G.711 A-Law
14 0001 1000 I-Element : Channel identification
15 0000 0001 length : 1
16 1--- ---- Extension bit : bit set
-0-- ---- interface ID present : ID not present (implicitly identified)
--0- ---- interface type : basic interface
---0 ---- spare bit(s) : bit not set
---- 0--- preferred/exclusive : preferred
---- -0-- D-Channel indicator : channel is not D-Channel
---- --11 channel selection : any channel
17 0001 1110 I-Element : Progress indicator
18 0000 0010 length : 2
19 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0101 location : priv. netw. serv. remote user
20 1--- ---- Extension bit : bit set
-000 0011 progress indication : origination is not ISDN
21 0110 1100 I-Element : Calling party number
22 0000 0100 length : 4
23 0--- ---- Extension bit : bit not set
-100 ---- type of number : subscriber number
---- 0001 numbering plan : ISDN, CCITT Rec E.164/E.163
24 1--- ---- Extension bit : bit set
-00- ---- present. indicator : presentation allowed
---0 00-- spare bit(s) : 0x00
---- --00 screening indicator : user provided, not screened
Information content
Byte 25 ... 26
31
27 0111 1101 I-Element : High layer compatibility
28 0000 0010 length : 2
29 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---1 00-- interpretation : first high layer ID to be used in call
---- --01 presentation : high layer protocol profile
30 1--- ---- Extension bit : bit set
-000 0001 characteristics : telephony
________________________________________________________________________________
[D-channel-dump] 2009/03/25 12:52:35,380
ECHO-1 RX 20:19:27,380 Frame number : 204
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 010- N(S) : 26
---- ---0 Type : I-Frame
4 0000 010- N(R) : 2
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0000 0101 Message Type : SETUP
9 0000 0100 I-Element : Bearer capability
10 0000 0011 length : 3
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 0000 transfer capability : speech
12 1--- ---- Extension bit : bit set
-00- ---- transfer mode : circuit mode
---1 0000 transfer speed : 64 kbit/s
13 1--- ---- Extension bit : bit set
-01- ---- L1 indentifier : 0x01
---0 0011 user inf. L1 prot. : G.711 A-Law
14 0001 1000 I-Element : Channel identification
15 0000 0001 length : 1
16 1--- ---- Extension bit : bit set
-0-- ---- interface ID present : ID not present (implicitly identified)
--0- ---- interface type : basic interface
---0 ---- spare bit(s) : bit not set
---- 0--- preferred/exclusive : preferred
---- -0-- D-Channel indicator : channel is not D-Channel
---- --11 channel selection : any channel
17 0001 1110 I-Element : Progress indicator
18 0000 0010 length : 2
19 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0101 location : priv. netw. serv. remote user
20 1--- ---- Extension bit : bit set
-000 0011 progress indication : origination is not ISDN
21 0110 1100 I-Element : Calling party number
22 0000 0100 length : 4
23 0--- ---- Extension bit : bit not set
-100 ---- type of number : subscriber number
---- 0001 numbering plan : ISDN, CCITT Rec E.164/E.163
24 1--- ---- Extension bit : bit set
-00- ---- present. indicator : presentation allowed
---0 00-- spare bit(s) : 0x00
---- --00 screening indicator : user provided, not screened
Information content
Byte 25 ... 26
31
27 0111 1101 I-Element : High layer compatibility
28 0000 0010 length : 2
29 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---1 00-- interpretation : first high layer ID to be used in call
---- --01 presentation : high layer protocol profile
30 1--- ---- Extension bit : bit set
-000 0001 characteristics : telephony
________________________________________________________________________________
[D-channel-dump] 2009/03/25 12:52:35,480
TE-1 RX 20:19:27,480 Frame number : 206
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0000 010- N(S) : 2
---- ---0 Type : I-Frame
4 0011 011- N(R) : 27
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 1--- ---- CR-Flag : Destination
-110 0001 Call reference value : 97
8 0000 1101 Message Type : SETUP ACKNOWLEDGE
9 0001 1000 I-Element : Channel identification
10 0000 0001 length : 1
11 1--- ---- Extension bit : bit set
-0-- ---- interface ID present : ID not present (implicitly identified)
--0- ---- interface type : basic interface
---0 ---- spare bit(s) : bit not set
---- 1--- preferred/exclusive : exclusive
---- -0-- D-Channel indicator : channel is not D-Channel
---- --01 channel selection : B1 channel
12 0001 1110 I-Element : Progress indicator
13 0000 0010 length : 2
14 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0001 location : priv. netw. serv. local user
15 1--- ---- Extension bit : bit set
-000 1000 progress indication : in-band information now available
________________________________________________________________________________
[Callmanager] 2009/03/25 12:52:35,480 [VCM] : -----[ CALL PROCEEDING INDICATION,
call-id=17195
[Callmanager] 2009/03/25 12:52:35,480 [VCM] : - info : Src CallId=17911561
82@192_168_1_32
[Callmanager] 2009/03/25 12:52:35,480 [ISDN-LINE] : -----[ PROGRESS, plci=0X91B
[Callmanager] 2009/03/25 12:52:35,480 [ISDN-LINE] : - info : call-id=17195
[Callmanager] 2009/03/25 12:52:35,480 [ISDN-LINE] : - info : inband tones
available
[D-channel-dump] 2009/03/25 12:52:35,490
TE-1 TX 20:19:27,490 Frame number : 207
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 011- N(S) : 27
---- ---0 Type : I-Frame
4 0000 011- N(R) : 3
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0111 1011 Message Type : INFORMATION
9 1010 0001 I-Element : Sending complete
10 0010 1100 I-Element : Keypad facility
11 0000 1000 length : 8
Information content
Byte 12 ... 19
*4019988
20 0111 0000 I-Element : Called party number
21 0000 0011 length : 3
22 1--- ---- Extension bit : bit set
-000 ---- type of number : unknown
---- 0001 numbering plan : ISDN, CCITT Rec E.164/E.163
Information content
Byte 23 ... 24
#8
________________________________________________________________________________
[Callmanager] 2009/03/25 12:52:35,500 [VCM] : -----[ PROGRESS INDICATION, call-i
d=17195
[Callmanager] 2009/03/25 12:52:35,500 [SIP-CALLMANAGER] : -----[ Progress, call-
id=17195
[D-channel-dump] 2009/03/25 12:52:35,510
ECHO-1 RX 20:19:27,510 Frame number : 208
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 011- N(S) : 27
---- ---0 Type : I-Frame
4 0000 011- N(R) : 3
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0111 1011 Message Type : INFORMATION
9 1010 0001 I-Element : Sending complete
10 0010 1100 I-Element : Keypad facility
11 0000 1000 length : 8
Information content
Byte 12 ... 19
*4019988
20 0111 0000 I-Element : Called party number
21 0000 0011 length : 3
22 1--- ---- Extension bit : bit set
-000 ---- type of number : unknown
---- 0001 numbering plan : ISDN, CCITT Rec E.164/E.163
Information content
Byte 23 ... 24
#8
________________________________________________________________________________
[Callmanager] 2009/03/25 12:52:35,510 [VCM] : -----[ connect media, call-id=1719
5
[D-channel-dump] 2009/03/25 12:52:37,890
TE-1 RX 20:19:29,890 Frame number : 210
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0000 011- N(S) : 3
---- ---0 Type : I-Frame
4 0011 100- N(R) : 28
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 1--- ---- CR-Flag : Destination
-110 0001 Call reference value : 97
8 0100 0101 Message Type : DISCONNECT
9 0000 1000 I-Element : Cause
10 0000 0010 length : 2
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0001 location : priv. netw. serv. local user
12 1--- ---- Extension bit : bit set
-001 0000 cause : normal call clearing
________________________________________________________________________________
[Callmanager] 2009/03/25 12:52:37,890 [ISDN-LINE] : -----[ CANCEL INDICATION, ca
ll-id=17195
[Callmanager] 2009/03/25 12:52:37,890 [VCM] : -----[ DISCONNECT INDICATION, call
-id=17195
[Callmanager] 2009/03/25 12:52:37,890 [VCM] : - info : cause is 'normal ca
ll clearing'
[Callmanager] 2009/03/25 12:52:37,890 [VCM] : - info : disconnect media
[Callmanager] 2009/03/25 12:52:37,900 [VCM] : - info : disconnect indicati
on from destination
[Callmanager] 2009/03/25 12:52:37,920 [VCM] : - info : ckeck backup, code:
16
[Callmanager] 2009/03/25 12:52:37,920 [VCM] : - info : no alternative (bac
kup) available
[Callmanager] 2009/03/25 12:52:37,920 [SIP-CALLMANAGER] : -----[ DISCONNECT REQU
EST
[Callmanager] 2009/03/25 12:52:37,920 [SIP-CALLMANAGER] : - info : cause i
s 'normal call clearing'
[Callmanager] 2009/03/25 12:52:38,080 [Sip-UA] : -----[ 200 OK INDICATION
[Callmanager] 2009/03/25 12:52:38,090 [Sip-UA] : - info : call-id=17195
[Callmanager] 2009/03/25 12:52:38,090 [VCM] : -----[ DISCONNECT RESPONSE, call-i
d=17195
[Callmanager] 2009/03/25 12:52:38,090 [VCM] : - info : cause is 'normal ca
ll clearing'
[Callmanager] 2009/03/25 12:52:38,090 [ISDN-LINE] : -----[ DISCONNECT CONFIRM, c
all-id=17195
[Callmanager] 2009/03/25 12:52:38,090 [ISDN-LINE] : - info : plci=0X91B
[D-channel-dump] 2009/03/25 12:52:38,090
TE-1 TX 20:19:30,090 Frame number : 213
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 100- N(S) : 28
---- ---0 Type : I-Frame
4 0000 100- N(R) : 4
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0100 1101 Message Type : RELEASE
9 0000 1000 I-Element : Cause
10 0000 0010 length : 2
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0000 location : user
12 1--- ---- Extension bit : bit set
-001 0000 cause : normal call clearing
________________________________________________________________________________
[D-channel-dump] 2009/03/25 12:52:38,100
ECHO-1 RX 20:19:30,100 Frame number : 214
1 0000 00-- SAPI : 0
---- --0- C/R : bit not set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0011 100- N(S) : 28
---- ---0 Type : I-Frame
4 0000 100- N(R) : 4
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 0--- ---- CR-Flag : Origination
-110 0001 Call reference value : 97
8 0100 1101 Message Type : RELEASE
9 0000 1000 I-Element : Cause
10 0000 0010 length : 2
11 1--- ---- Extension bit : bit set
-00- ---- coding standard : CCITT
---0 ---- spare bit(s) : bit not set
---- 0000 location : user
12 1--- ---- Extension bit : bit set
-001 0000 cause : normal call clearing
________________________________________________________________________________
[D-channel-dump] 2009/03/25 12:52:38,220
TE-1 RX 20:19:30,220 Frame number : 216
1 0000 00-- SAPI : 0
---- --1- C/R : bit set
---- ---0 EA : bit not set
2 1010 001- TEI : 81
---- ---1 EA : bit set
3 0000 100- N(S) : 4
---- ---0 Type : I-Frame
4 0011 101- N(R) : 29
---- ---0 P/F : bit not set
5 0000 1000 Prot. Discr. : Q.931
6 0000 ---- spare bit(s) : 0x00
---- 0001 Call ref. length : 1
7 1--- ---- CR-Flag : Destination
-110 0001 Call reference value : 97
8 0101 1010 Message Type : RELEASE COMPLETE
________________________________________________________________________________
[Callmanager] 2009/03/25 12:52:38,220 [ISDN-LINE] : -----[ DISCONNECT RESPONSE,
plci=0X91B
[Callmanager] 2009/03/25 12:52:38,220 [VCM] : -----[ DISCONNECT RESPONSE, call-i
d=17195
[Callmanager] 2009/03/25 12:52:38,220 [VCM] : - info : cause is 'normal ca
ll clearing'
[Callmanager] 2009/03/25 12:52:38,220 [VCM] : - info : reject, destination
information not available

exit
Goodbye

[anton]

Hi,

nimm doch mal aus deinem Call-routingeintrag die ## raus und setze statt dessen nur eine #, also statt ##8*.... die #8*.....

Im D-Channel-Trace siehst du dann auch den Unterschied im Content:

##8*12345# - dein String wird zwerstückelt in den Information-content und die Called-Party-ID:

Information content
Byte 12 ... 19
*123456#

20 0111 0000 I-Element : Called party number
21 0000 0010 length : 2
22 1--- ---- Extension bit : bit set
-000 ---- type of number : unknown
---- 0001 numbering plan : ISDN, CCITT Rec E.164/E.163

Information content
Byte 23 ... 23
8



#8*12345# -> Der Informationcontend wird sauber als komplettes Facility übertragen:

Information content
Byte 11 ... 20
#8*123456#


Hintergrund ist, das die # im VCM als Platzhalter verwendet wird und du den VCM damit durcheinander bringst.

LG
Oliver

[KK]

Ist mir auch aufgefallen, aber die TK-Anlage muß ##8*4019988# als komplette Sequenz emfangen. Übrigens ist dies bei weitem nicht die einzige Sequenz, die bei Auerswald mit ## beginnt...

Gibt's vielleicht einen Präfix, der die Zerstückelung verhindert??? Oder dokumentierte Regeln, wie der Call Manager mit enthaltenen Sternen und Rauten intern umgeht? Ich kann mir einfach nicht vorstellen, dass ## ausgeschlossen sein soll, alle anderen Sequenzen funzen einwandfrei..


Grüße von KK

[anton]

Hi KK,

hier wird es jetzt etwas schwierig. Die von Auerswald verwendeten Keypad-Sequenzen entsprechen nicht dem "normalen" Keypads, die im ISDN-Standard vorgesehen sind. Das Verwenden eines ## ist im öffentlichen ISDN auch nicht üblich und in keinem Standard vorgesehen. Das ist auch der Grund, warum sich LANCOM für die # als Platzhalter entschieden hat.

Anlagenintern eigene herstellerspezifische Keypad-Squenzen zu verwenden, ist aber bei TK-Anlagenherstellern durchaus üblich. Eine AGFEO verhält sich da auch nicht anders.

Ich bin ja jetzt nicht der große Auerswald-Experte, sprich, habe keine in meinem Zugriff, aber hast du nicht die Möglichkeit, das innerhalb der Auerswald durch Call-Routing umzusetzen, indem du noch eine zusätzliche # als Präfix vorsetzt, wenn ein Ruf eingeht mit einer #?

LG
anton