Tach Zusammen,
folgendes Szenario:
Bestand:
WLC-4006+ und 4x 17xx-AP (verschiedene Modelle)
SSID A WPA2/3-PSK, Standard+fastroaming, mgmt-frames Verschlüsselung optional (ausgegraut)
SSID B WPA2/3-Enterprise, Standard+fastroaming, mgmt-frames Verschlüsselung optional (ausgegraut)
SSID C WPA2, leps-u, Standard+fastroaming, mgmt-frames Verschlüsselung optional
Soweit funktioniert alles. Da WPA3 Mgmt.Frames generell verschlüsselt, ist der Punkt wohl ausgegraut. Bei Umstellung auf WPA 2 ist er schaltbar. Clients können sich problemlos anmelden (auf allen SSID).
Jetzt kommen je ein LX6400 und LW600 (FW 5.20.0047RU1) dazu:
Die SSID sind ausgerollt, jedoch können sich keine Clients an den WPA2/3-SSID anmelden, mutmaßlich hängt es an der mgmt-Frame-Protection (die auch im Web-GUI des AP auf mandatory steht). Aber leider kann ich gar nichts sehen, wie traced man auf den Dingern?
Viele Grüße aus OBC
Udo
PS Noch etwas: Es scheint, als deaktivierten die LXer über den WLC entfernte SSID nicht sofort. Es werden auch etliche Minuten später noch Clients auf der SSID angezeigt (Web-GUI des AP), auch ist eine Anmeldung an den Bestandsnetzen erst nach Abschaltung der LXer wieder möglich?
Frage zu LX-6400 bzw. LW-600 Thema WPA2/3
Moderator: Lancom-Systems Moderatoren
Frage zu LX-6400 bzw. LW-600 Thema WPA2/3
... das Netz ist der Computer ...
n* LC und vieles mehr...
n* LC und vieles mehr...
Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3
Hallo,
grundsätzlich verhält sich das mit PMF /11w so: Bei WPA3 wird PMF erzwungen. Bei WPA2/3 mixed-mode wird PMF nur für Clients erzwungen, die WPA3 verwenden wollen. Für WPA2-Clients wird PMF optional erlaubt. Dies ist bei LCOS und LCOS LX gleich. Mag sein, dass es in der Webconfig von LCOS LX nicht ganz klar rüberkommt
Unter LX lässt sich sich ähnlich tracen, wie im LCOS: tr # wlan auf der CLI um den WLAN-Trace zu togglen. Mit trace # wlan --log kommen noch die historische Logeinträge mit, soweit das Log zurück reicht.
Evtl. zur Eingrenzung auf den APs auch mal Fast-Roaming abschalten?
grundsätzlich verhält sich das mit PMF /11w so: Bei WPA3 wird PMF erzwungen. Bei WPA2/3 mixed-mode wird PMF nur für Clients erzwungen, die WPA3 verwenden wollen. Für WPA2-Clients wird PMF optional erlaubt. Dies ist bei LCOS und LCOS LX gleich. Mag sein, dass es in der Webconfig von LCOS LX nicht ganz klar rüberkommt
Unter LX lässt sich sich ähnlich tracen, wie im LCOS: tr # wlan auf der CLI um den WLAN-Trace zu togglen. Mit trace # wlan --log kommen noch die historische Logeinträge mit, soweit das Log zurück reicht.
Evtl. zur Eingrenzung auf den APs auch mal Fast-Roaming abschalten?
Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3
Hallo Cytor,
dank für die Info, bin jetzt auch schon etwas weiter. Die LX-6400 hängen ohne Probleme am WLC und tuen was sie sollen.
Eine Herausforderung ist noch der LW-600. Dieser lässt sich problemlos an den Controller anbinden.
So weit so gut, aber nach Reboot aller Komponenten (WLC, AP via "Steckdosenleiste") kommt der LW-600 nicht mehr wieder an den AP, die LXer laufen wie vorher.
Anbei der CAPWAP-Trace vom LW-600. Alle AP sind mit der neuesten Firmware ausgestattet, der WLC hat 10.42 (mit 10.40 ging es auch nicht). Alle Geräte im selben L2-Netz.
Viele Grüße aus OBC
Udo
dank für die Info, bin jetzt auch schon etwas weiter. Die LX-6400 hängen ohne Probleme am WLC und tuen was sie sollen.
Eine Herausforderung ist noch der LW-600. Dieser lässt sich problemlos an den Controller anbinden.
So weit so gut, aber nach Reboot aller Komponenten (WLC, AP via "Steckdosenleiste") kommt der LW-600 nicht mehr wieder an den AP, die LXer laufen wie vorher.
Anbei der CAPWAP-Trace vom LW-600. Alle AP sind mit der neuesten Firmware ausgestattet, der WLC hat 10.42 (mit 10.40 ging es auch nicht). Alle Geräte im selben L2-Netz.
Viele Grüße aus OBC
Udo
Code: Alles auswählen
Using username "root".
#
| LANCOM LW-600
-- snip --
root@:/
> trace # capwap
Automatic-Firmware-Updater OFF
Capwap ON
Client-Management OFF
Firmware OFF
IAPP OFF
Kernel OFF
LMC OFF
Mapper OFF
SNMP OFF
SSH OFF
Sys OFF
WLAN OFF
root@:/
> [Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:41:48,528 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:48,528 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:41:53,618 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:53,618 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: Discovery response get wlc timestamp [1593344518][2020/06/28 11:41:58] local [1593344513][2020/06/28 11:41:53]
[Syslog] 2020/06/28 11:41:48,651 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:41:58] current [2020/06/28 11:41:48]
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: Discovery Response with invalid sequence (3 != 2)
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:41:53,717 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:53,717 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:42:23,855 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:42:23,855 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Discovery interval configured [20000] to wait [4464]
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:42:33,377 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:42:33,377 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:42:33,408 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:42:38,409 : capwap[1682]: Discovery response get wlc timestamp [1593344568][2020/06/28 11:42:48] local [1593344553][2020/06/28 11:42:33]
[Syslog] 2020/06/28 11:42:38,410 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:42:48] current [2020/06/28 11:42:38]
[Syslog] 2020/06/28 11:42:38,441 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:38,441 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:42:47,212 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:42:52,247 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:42:52,247 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:43:22,384 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:43:22,384 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Discovery interval configured [20000] to wait [3953]
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:43:31,396 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:43:31,397 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:43:31,430 : capwap[1682]: Discovery response get wlc timestamp [1593344621][2020/06/28 11:43:41] local [1593344611][2020/06/28 11:43:31]
[Syslog] 2020/06/28 11:43:31,430 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:43:41] current [2020/06/28 11:43:31]
[Syslog] 2020/06/28 11:43:31,464 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:31,464 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:43:43,617 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:43:43,617 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:44:13,755 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:44:13,755 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Discovery interval configured [20000] to wait [19393]
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:44:38,217 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:44:38,217 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:44:38,249 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: Discovery response get wlc timestamp [1593344688][2020/06/28 11:44:48] local [1593344678][2020/06/28 11:44:38]
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:44:48] current [2020/06/28 11:44:38]
[Syslog] 2020/06/28 11:44:38,283 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:38,283 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:44:44,675 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:44:44,696 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:44:44,696 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:44:44,808 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:45:14,838 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:45:14,838 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Discovery interval configured [20000] to wait [16135]
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:45:36,046 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:45:36,046 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:45:36,081 : capwap[1682]: Discovery response get wlc timestamp [1593344746][2020/06/28 11:45:46] local [1593344736][2020/06/28 11:45:36]
[Syslog] 2020/06/28 11:45:36,081 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:45:46] current [2020/06/28 11:45:36]
[Syslog] 2020/06/28 11:45:36,111 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:36,111 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:45:55,396 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:45:55,396 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:45:55,508 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,508 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:46:25,538 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:46:25,538 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Discovery interval configured [20000] to wait [6876]
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:46:37,487 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:46:37,487 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:46:37,520 : capwap[1682]: Discovery response get wlc timestamp [1593344807][2020/06/28 11:46:47] local [1593344797][2020/06/28 11:46:37]
[Syslog] 2020/06/28 11:46:37,520 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:46:47] current [2020/06/28 11:46:37]
[Syslog] 2020/06/28 11:46:37,552 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:37,552 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:46:51,095 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:46:51,095 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:46:51,208 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,208 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
root@:/
> trace # capwap
Automatic-Firmware-Updater OFF
Capwap OFF
Client-Management OFF
Firmware OFF
IAPP OFF
Kernel OFF
LMC OFF
Mapper OFF
SNMP OFF
SSH OFF
Sys OFF
WLAN OFF
root@:/
>
... das Netz ist der Computer ...
n* LC und vieles mehr...
n* LC und vieles mehr...
Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3
Hab' mal ein Ticket eingestellt ...
... das Netz ist der Computer ...
n* LC und vieles mehr...
n* LC und vieles mehr...